Bränsletryck.

Detta är vad Comp Cams svarade angående min 292HR cam

Ingemar

---- Original Message -----

Sent: Monday, August 12, 2002 4:12 PM

Subject: Re: De Tomaso Pantera Sweden.

Hi Ingemar,
You are right, this engine should turn up to 6500RPM. First thing to check is your spring installed height, 1.880 is correct install height; with 125lbs. on the seat and 320lbs. open pressure. Then check preload on the lifters, no more than 1/2 turn on the lifters. Make sure you have a good one piece pushrod for that cam.

Ingemar Nilsson wrote:

Dear Mr. Dennis Lofton.

I have a Pantera with Ford 351C and the valves are floating at 5800 revs, Would you please look what my engine contents and perhaps tell me why.       (everything in very god order, new stuff)

It should take 6500 revs according to your catalog.

It works fantastic but the last revs arn´t there.      Heads 2v 10;1

Cam 32-234-4 292HR Comp cams Lifters 832-16 Comp cams Valvesprings 924-16 Comp cams

Pushrod 7502-16 Comp cams, Rocker arms 1330-16 Comp cams, Lash caps  621-16 Comp cams,

Manley Valve stainless steelI intake 2,190 Exhaust 1,710, Carburetor Holly 800cfm Dubbelpumper,

Ignition Mallory 692 Hy Fire 1Vc, Distributor Mallory 4756701 Vacuum advance, Intake Mainfold Weinand x-elerator Fluidampr.

Yours

Ingemar Nilsson